如果产品信号低于阈值的一半

如果一台金属探测器正常工作时的信号值低于阈值的一半,则意味着您的金属探测器误报率极其低,在正常情况下几乎绝对不可能发生误报!这不仅适用于LOMA金属探测器,也适用于几乎所有金属探测器!

也就是说,如果发生金属报警的情况,则几乎一定是发生了情况的改变,这个改变包括产品可能有金属,也包括有突发的各种干扰等!总之,就是报警一定是突发的!如果您对金属探测器不够了解,可能无法完全理解我们的意思!


这是因为今天我们结束了一家客户的工作,我们应该客户的要求解决他们的金属探测器误报的问题。在今天最后处理后我们观察到信号值一直没有超过一半的情况,因此根据我们的经验,尤其结合我们的专业分析方法,我们预计这个问题应该已经解决!因为客户说设备时好时坏,也许好几天都是好的,然后不确定什么时候就会发生频繁误报!那就让我们拭目以待!


我们不制造金属探测器,但是我们在应用领域足够专业!实际上这个发布主要计划在大约2周后,让我们的客户知道我们超乎寻常的专业水准。


If the signal value of a metal detector is lower than half of the Threshold when it is working normally, it means that the False Detection Rate of your metal detector is extremely low, and it is almost impossible to cause False Detection under normal circumstances! This applies not only to LOMA metal detectors, but also to almost all metal detectors!

In other words, if a metal alarm occurs, it is almost certainly a change in the situation. This change includes the possibility of metal in the product, as well as sudden various interferences! In short, the alarm must be sudden! If you don’t know enough about metal detectors, you may not fully understand what we mean!


This is because today we ended the work of a customer, and we accepted the customer's request to solve their metal detector false alarm. After the final processing today, we observed that the signal value has never exceeded half. Therefore, based on our experience, especially in combination with our professional analysis methods, we predict that this problem should have been resolved! Because customers say that the equipment is good and sometimes bad, maybe several days are good, and then they are not sure when frequent false alarms will occur! Then let us wait and see!


We do not manufacture metal detectors, but we are professional enough in the application field! In fact, this release is mainly planned to let our customers know our extraordinary professional standards after about 2 weeks.